How To Shorten Mini Blinds To Fit Window

Download Article

Many sets of mini-blinds sold in retail stores are manufactured to fit standard sized windows. While the price for these types of blinds is used very reasonable, a meaning corporeality of boosted length can make the blinds expect like a poor fit for the window. Fortunately, information technology is possible to shorten mini-blinds with relatively picayune endeavour.

1

Measure the height of the window. You need this to determine the exact length that yous need for the mini-blinds. Starting time with the within top of the casing where the blinds will exist mounted, and measure all the way to the windowsill below.
2

Place the mini-blinds on a flat surface and expand to the total length. Measure from the top of the blind casing to the blind slat that most closely corresponds with the window measurements. Move downward 1 additional slat to allow a little room for error. Marking the first slat to exist removed with a marking or pen.

Advertisement
3
Remove the rail plugs. Mini-blinds are equipped with plastic plugs on the underside of the lesser runway. Most designs volition feature iii plugs along the length of the rail. Releasing the plugs allows access to the lift string and the 3 string ladders on the mini-blinds.^[1]
- You can usually but pull out the plugs without having to practice anything fancy.
4

Untie the knot on the elevator cords and pull upward. This action will slide the lift cords through the holes in the bottom rail and the slats immediately to a higher place the rail. Continue to pull the cords upward until the marked slat is freed from the cords.^[2]
5

Slide the bottom rail out of the string ladders. This will provide you with better access to the bullheaded slats.^[3]
6

Remove the desired number of slats. With the lift cords no longer threaded through the slats, this requires sliding each of the slats out of the 3 string ladders.^[4]

1

Reattach the lesser rail. Slide the runway dorsum into the string ladders just under the remaining blind slats. Trim off whatever unused sections of the ladders that you no longer demand.^[v]
2

Reconnect the lift cords. Tie a new knot in each of the 3 ends. Use the measuring tape to brand sure the knots are in the ideal position so the cords are withal lengths, and the slats will hang evenly.
3

Replace the rail plugs. Make sure that all 3 are securely in position, and so hang the adjusted mini-bullheaded in the window. Accept a moment to endeavour raising and lowering the blinds, as well as opening and closing them to make certain they are functioning properly.

Add New Question

Question

Is it possible to shorten a cordless vinyl mini blind?

No. They are pre-tensioned, or designed to work with the weight they commencement with. Removing annihilation would cause the blind to raise on its ain, and no longer be a blind.
Question

I cut the cord to raise and lower, and it went into the machinery in the meridian. How tin can I become the string?

Yous'll accept to have apart the elevation, a very wearisome and time-consuming job. You might want to consider just ownership another.
Question

How do I shorten vinyl mini-blinds, the roll-up type?

No. They are pre-tensioned, or designed to piece of work with the weight they kickoff with. Removing anything would cause the blind to raise on its own and no longer be a blind.
Question

How exercise I manage to thread the cords through the tiny holes in the bottom piece?

I had an upholstery needle with an heart large enough to adapt the cord. I threaded the cord into the needle eye and put it through the hole in the bottom piece.

Ask a Question

200 characters left

Include your email accost to become a message when this question is answered.

Submit

Video

If the rails plugs are difficult to reinsert, use a safe mallet to gently pound them back into position. The softer head on the mallet will prevent the possibility of denting or otherwise damaging the plugs.
While it is possible to shorten mini-blinds while they are hanging in a window, simply eye-balling the length, laying the blinds on a flat surface makes it easier to apply exact measurements and is oft a much quicker process.
Save the removed blind slats in a safe identify. You can always use them to replace any slats that are damaged over the years.

Thank you for submitting a tip for review!

Brand certain that y'all don't lose the plugs while y'all're working, otherwise yous won't be able to shut up the bottom runway.

Things You lot'll Need

Scissors
Tape Mensurate

About This Commodity

Commodity Summary X

To shorten your mini-blinds, start by placing them on a apartment surface and expanding them to the full length. Next, remove the rail plugs, untie the knot on the elevator cords, and pull upward to release equally many slats as you similar. Then, reattach the bottom rail into the string ladders only under the remaining slats and trim off whatever unused sections of the ladders. Additionally, necktie a new knot in each of the ends of the lift cords. Finally, replace the rail plugs before hanging the adapted mini-blinds. To learn how to measure the elevation of the window the mini-blinds will hang in, proceed reading!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 153,876 times.